Bracelet display and bead spacing

Full screen, the gap between beads, the cord and the display plate.

These settings are in Appearance → Bracelet display.

Bead spacing

From −3 (tight beads) to +5 (loose beads), to one decimal place: slider, − / + buttons (0.1 per tap) or a value to type. A small preview shows the gap live. 0 = original setting. It applies everywhere: screen, card, video and photo.

Cord colour and thickness

Tick Custom elastic cord colour and pick the colour; the Cord thickness slider goes from 1 (thin) to 5 (thick), 2 = original thickness. They apply everywhere: screen, card, video and photo. A cord chosen by your customer keeps its own colour.

Bead shadow and light

The shadow under the beads, the lamp height, the softness and the glow of translucent stones are set by Loch Ness for every shop: your builder always has the same polished look, on screen, on the card, the product photo and the video. The glow colour of each of your translucent stones is chosen in My stones.

Display plate

The bracelet can rest on a round plate (stone, wood…) that turns with it, like a rotating display stand. In Appearance → Display plate, choose the one shown by default among the plates provided by Loch Ness. The Show the « Plate » button box lets your customers choose theirs (their choice is remembered on their device; in the builder they pick among the plates, with no « None » choice); Also on the card and the product photo places the plate on those images. Plates are provided by Loch Ness: you can't add your own.

Backdrop (Store module)

With the Backdrops module (Store tab), the bracelet can also be set in a fixed photo backdrop seen from above (slate, crystal cave, flowers…), with its turning plate. In Appearance → Backdrop, choose the one shown by default: the builder button then becomes Backdrop and your customers can change it. The backdrop also appears on the card, product photo and video. As long as you leave None, your plate stays exactly as before.

3D backdrops (add-on module)

With the 3D backdrops module, on top of the Backdrops module, some backdrops have a foreground: cut-out leaves, crystals or petals placed around the edges, above the backdrop. On computers, this foreground slides and zooms very slightly when the mouse moves, with a small delay: the backdrop seems to have depth. The bracelet, the plate and the backdrop stay still, and your customers place their beads as usual (clicks go through the foreground). On phones, and for people who chose to reduce motion, everything stays still. Foregrounds are prepared by Loch Ness, with the backdrops. The foreground also appears, still, on the bracelet photo (Photo button) and on the 3D photo for Facebook.

Natural look of the beads

In the flat view (screen, card, product photo, video), each bead looks more natural: its size varies very slightly (1 to 2 %) and it sits a touch off the circle, like in a real bracelet. A small dark hole shows where the cord goes through, and a contact shadow appears between two beads that touch (it fades when the beads are spaced out). The same bracelet always keeps the same look. The contact shadow follows the Shadow opacity.

Updated on November 10, 2026